SPS Immersion 6102 Series - Commercial & Industrial

The SPS Immersion Fired 6000 Series of steam boilers (20 HP to 125HP) is well known throughout the industry for its unique single-pass design and burner technology. Available in both high pressure and low pressure steam, the single pass immersion firetube design delivers premixed air and gas through multiple burner nozzles. A corresponding flue tube (“firetube”), completely immersed in liquid, is aligned with the nozzle head inside the combustion chamber. Upon combustion, the nozzles generate a focused, high velocity flame which radiates down the center of each tube. The SPS Immrsion Fired 6000 series carries the best warranty in the industry! A UL packaged steam boiler. The benefits of the technology in the SPS Immersion Fired Series steam boilers include:

Natural Efficiency

• Up to 82% efficiency
• Radiant heat is maximized across the primary heating surface
• Natural gas, LP gas, and Biogas fueled
• 0 to 125 psi of steam within 14 minutes !

Low Maintenance Cost and High Longevity

• Elimination of thermal shock due to balanced heat transfer across primary heating surface; allowing for up to 150° F ΔT
• Backed by a 20-year non-prorated thermal shock warranty
• Elimination of refractory breakdown due to single pass design (no refractory material is used; thereby, eliminating ALL refractory replacement and maintenance costs!)

Ease of Maintenance

• Hinged door provides quick access to burners, manifold and heating tubes for easy cleaning and routine maintenance
• Full access for Interior inspection within 15 minutes!
• Trimmed with non-proprietary components

Simplicity of Design

• No complex controls which require intensive training
• Fewer moving parts reduces incidence of failure and required replacement
• Best warranty on thermal shock in the industry !
• Review GBT's "Green Steam" aka "CLEAN STEAM" humidification models

Low NO_x Emissions

• Less than 30ppm NOx

_{Engineering data from the previous website can be found at: http://www.sellersengineering.com/engdata.asp . CAD drawing and design templates from the previous website can be found at: http://www.sellersengineering.com/producttemp.asp}